Индикатор Hiloactivator

ТОП-2 лучших брокера бинарных опционов в 2020 году:
  • БИНАРИУМ
    БИНАРИУМ

    № 1 в рейтинге! Гарантия честности, высокий доход! Хороший выбор для начинающих. Бонус за регистрацию счета!

  • ФИНМАКС
    ФИНМАКС

    Разнообразные торговые инструменты для опытных трейдеров!

Индикатор Hiloactivator

You MUST include a detailed description and a screenshot!

Entries
Upgrade to Elite to Download Gann HiLoActivator U1

Exported using NT Version 7.0.1000.10

This is a new implementation of the Gann HiLo activator for NinjaTrader 7. The HiLo Activator was introduced by Robert Krausz with his FibonacciTrader and first described by him in «The New Gann Swing Chartist», which was published in the TASC magazine (Stocks & Commodities V16:2, pp 57-66) in 1998. The original HiLo Activator was a three day simple moving average calculated from the daily highs and the daily lows.

The HiLowActivator gives a reversal signal, when the bar closes below the low average in an uptrend or above the high average in a downtrend. The HiLoActivator should be used in conjunction with other indicators.

This NinjaTrader version has a few particularities:

— It calculates the indicator value from the prior bar, that is one period ago. This is the reason that I have called it U1 in line with the SuperTrend U11 indicator.

Рейтинг надежных брокеров бинарных опционов с русским языком:
  • БИНАРИУМ
    БИНАРИУМ

    № 1 в рейтинге! Гарантия честности, высокий доход! Хороший выбор для начинающих. Бонус за регистрацию счета!

  • ФИНМАКС
    ФИНМАКС

    Разнообразные торговые инструменты для опытных трейдеров!

— With historical data and CalculateOnBarClose = true: Signals are generated for the current bar.

— With real-time data: The reversal signal is generated, when the first tick of the following bars confirms that the previous bar has been closed. It is recommended to use the One-tick repaint option with real-time data. The signal will then be shown for the bar which actually broke the stopline. The One-Tick repaint option is deactivated per default, to avoid any problems, if the indicator is called by a strategy.

Paintbars: The indicator has an option to display the trend via paintbars. Donwclose bars are filled, upclose bars are hollow. For the upclose bars an opacity can be selected for better visibility.

Arrows: The indicator has an option to display trend changes via an arrow.

Sound alerts: The indicator will alert to trend reversals and potential trend reversals. A potential trend reversal occurs when price touches the stop line intra-bar prior to the confirmation by a close on the other side of the stop line. The sound files are included with the indicator install file. Please unzip and copy them into the program files (x86)\ NinjaTrader 7\ sounds directory or whatever directory is used by NinjaTrader to store the sound files.

The HiLoActivatorU1 can calculate the stop line from the following moving averages:

— a moving median
— an ADXVMA
— a 2-pole Butterworth filter
— a 3-pole Butterworth filter
— a DEMA (double exponential MA)
— a DSMA (double simple MA)
— a DTMA (double triangular MA)
— a DWMA (double weighted MA)
— an Ehlers filter
— an EMA
— a 2-pole Gauss filter
— a 3-pole Gauss filter
— a 4-pole Gauss filter
— a HMA (Hull MA)
— a Holt EMA
— a Linear Regression indicator
— a SMA
— a 2-pole Supersmoother
— a 3-pole Supersmoother
— a TEMA (triple exponential MA)
— a TMA (triangular MA)
— a TSMA (triple simple MA)
— a TWMA (triple weighted MA)
— a VWMA(volume weighted MA)
— a WMA (weighted MA)
— a ZeroLagHATEMA
— a ZeroLagTEMA
— a ZLEMA

Before installing the indicator you need to update SuperTrendU11, Bollinger Universal & Keltner Universal, if you have them installed. Please remove old versions of those indicators first.

Category NinjaTrader 7 Indicators

July 12th, 2020
Size: 277.23 KB
Downloaded: 2986 times

#2 GANN HiLo Activator MT4

Hello everyone,
Today we will look at GANN HiLo Activator — another custom indicator for Metatrader 4 Platform.

I’ll show you the ways to use it.
You may have already noticed that I’m not giving the exact trading rules to trade upon.
That’s because I’m discovering and learning about MT4 custom indicators now. Learning in Forex never ends. I saw some good potential in those trading tools that we all may benefit from and improve our trading strategies, so I decided not to postpone it till better times and publish my observations as I move forward.

GANN HiLo Activator in Forex and the ways to use it:

This trend following indicator helps finding both: entries and exits. It allows to enter a trade quite early and stay in the trade longer.

If you have a set of rules or a trading system that require some improvement on entries and exits, GANN HiLo Activator could be the right tool.

For, example, let’s take our existing advanced Forex system #3
By adding GANN HiLo Activator we may now pinpoint more accurate entries.
We can also use this indicator for exits later, while at the same time trailing our stops, for example, with Bbands Stop custom indicator we talked about last time.

GANN HiLo also looks interesting for scalping, all you need is to identify the main trend take either only Buy or Sell signals given by the indicator. For example, we can use 50 EMA to identify the main trend.

Again, these are just great hints. In order to give you a set of rules, I need to make one first and test it properly. So, for now it will look like introduction, while hopefully later and also with a help of other traders I will update it to a good trading system with straight forward rules.

Download MQL

February 2, 2020 by Guru

Version for MetaTrader 5.

The indicator is based on point and figure chart, but their period is equal to ATR indicator values.

ATRPeriod – ATR period for calculation of steps.
Note: The indicator uses closes price, thus it is recommended to consider completed bars.

XCalper TFO

February 2, 2020 by Guru

This oscillator was developed exclusively by xCalper in 2020 based on moving averages calculations to indicate and try predicting oversold and overbought levels.

The fast line (white, by default) oscillates basically between values -0.5 (oversold) and +0.5 (overbought). Whenever this line crosses upward value -0.5, it means an oversold price level. When it crosses downward value +0.5, it means an overbought price level. When fast line crosses value 0.0 and returns, it is a strong pull-back indication.

The slow line (yellow, by default) is a simple average of fast line with period and scale as parameters. This line has similar interpretation of the fast line for its oversold/overbought levels.

Additionally, slow line signal (positive, above 0.0 or negative, below 0.0) can guide trade direction in conjunction with fast line.

This oscillator is better used in sideway markets, where its optional but powerful price prediction can help traders and scalpers to enter and exit positions.

Due to MetaTrader technical limitations, prediction is not available in testing mode.

XCalper HiLo Activator

February 2, 2020 by Guru

HiLo Activator v1.02 by xCalper

The HiLo Activator is similar to moving average of previous highs and lows.

It is a trend-following indicator used to display market’s direction of movement. The indicator is responsible for entry signals and also helps determine stop-loss levels.

The HiLo Activator was first introduced by Robert Krausz in the Feb. 1998 issue of Stocks & Commodities Magazine.

XCalper Didi index

February 2, 2020 by Guru

This indicator and its usage was developed by Brazilian trader and analyst Odir Andrade Aguiar (nickname Didi) from Doji Star.

Usage
It is based on the ratio of moving averages with periods 3 (FAST) and 20 (SLOW) by the 8-period moving, which are default settings.

When SLOW and FAST are very close and near 1.0-line (white center line), they can indicate a buy or sell signal in next candles. Such signal is know as Agulhada (Needleful).

Buy entry happens when FAST line moves UP while SLOW line moves DOWN with increasing volume, after signal.
Sell entry happens when SLOW line moves UP while FAST line moves DOWN with increasing volume, after signal.
It is important to mention that:

references should only be used to start the trade. Other indicators must be used to exit the trade;
signals work best when stock/futures has high volume and liquidity.

Window functions Indicator

February 2, 2020 by Guru

The indicator includes the following windows functions:

Rectangular window
Hanning1 window
Hanning2 window
Blackman window
Blackman_Harris window
Triangular window
Triangular1 window
Triangular2 window
Bartlett window
Welch window
Parzen window
Cosine window
Modblackharr window
Nuttall window
Nuttall20 window
Nuttall11 window
Nuttall02 window
Nuttall30 window
Nuttall21 window
BlackmanNuttall window
Flattop window
Gauss window
AdjustableGaussian window
Wp2inp window
Poisson window
BartlettHann window
Lanczos window
Sinc window
Price selection:

Close, Open, High, Low
Median, Typical, Weighted, Simple, Quarted Price
TrendFollow_1, TrendFollow_2 Price
Demark Price
The indicator can optionally set Global Variables.

Wolfe waves ultra for MT5

February 2, 2020 by Guru

The indicator automatically draws Wolfe waves.

The indicator uses Wolfe waves found in three timeframes. This indicator is especially accurate because it waits for a breakout in the wave direction before signaling the trade.

Recommended timeframe: М1.

Indicator features
Amazingly easy to trade.
The indicator is able to recognize all the patterns of Wolfe waves in the specified period interval.
It is a check of potential points 1,2,3,4,5 on every top, not only the tops of the zigzag.
Finds the points and builds the lines automatically.
Trade reliable price reversals in three timeframes
A cutting-edge tool for beginners and experienced traders.
Arrow and alert for those who don’t know how to use Wolfe waves.
Alert, Sound, Email and PUSH are available in the indicator.
The indicator has a minimum of adjustable parameters:
The last point of the wave is redrawn as the pattern expands (can be customized).
An alert and an arrow are displayed when the pattern forms and also when the wave+price breakout takes place.

Settings
Setting waves maximum

include wave maximum – enable/disable Wolfe maximum.
MaxHistoryBars – lookback period.
Period – the number of bars used for the indicator calculations..
color lines – wave color.
color line 1-4
Setting waves normal

include wave normal – enable/disable Wolfe normal.
MaxHistoryBars – lookback period.
Period – the number of bars used for the indicator calculations..
color lines – wave color.
color line 1-4
Setting waves minimum

include wave minimum – enable/disable Wolfe minimum.
MaxHistoryBars – lookback period.
Period – the number of bars used for the indicator calculations..
color lines – wave color.
color line 1-4
High up points 1,2,3,4,5 – distance of high points 1.2.3.4.5.
Low down points 1,2,3,4,5 – distance of lower points 1.2.3.4.5.
On what number bars move line, ( 0 = zero bar ) – number of bars to shift lines (0 = zero bar).
number of waves in each period: – this is the number of waves at a time: e.g. “on one wave” – the last wave is deleted and a new one is drawn instead; “in two waves” – the last wave stays, two waves will be available on the chart.
Setting notice – set the notification of the Wolfe waves occurrence
alert – alert on/off (popup message).
email – enable/disable the email alert.
PUSH – enable/disable push notifications.
sound signal – enable/disable the sound alert.
name sound signal – the name of the sound wav file.

XCalper CandleTimer

February 2, 2020 by Guru

This auxiliary indicator displays time left before closing on the current timeframe with continuous update.

It also shows the last trade price and variation from a previous day close.

This indicator is pretty handy for daytraders and scalpers who want to precisely monitor closing and opening of candles.

Some parameters available:

Font family
Font size
Font color
Distance from the right margin

Wolfe waves modified for mql5

February 2, 2020 by Guru

Представляем вашему вниманию совершенно уникальный индикатор, который автоматически строит Волны Вульфа и отличается высокой эффективностью торговой стратегии.

Использование
При появлении цифры 5 ждем, когда первая свеча закроется за Moving Average, далее смотрим на центральные три линии, которые показывают, какой объем лота нужно открыть, если 5 точка пересекла линию 25%, и свеча закроется за Moving Average, далее мы открываем сделку с лотом: = (Берем наш лот к примеру (0.40) и делим на четыре части, и открываем четверть лота (0.10)). Если 5 точка пересекла линию 100% (1-3) и свеча закроется за Moving Average, далее мы открываем сделку с лотом: = (полный объем 0.40), держим сделку открытой до момента, когда цена дойдет до линии 1-4. Цена доходит не всегда, учтите это. Рекомендуем использовать трейлинг-стоп.

Примечания для работы индикатора в тестере стратегий
В тестер стратегий: индикатор перестраивается постоянно при нахождении новой волны, или пробита линия (“1 – 4 , 1 – 3 или нижевыше” = это можно настроить).
В реале или демо: индикатор перестраивается если нажать кнопку (Restart (Wolf Waves), или пробита линия (“1 – 4 , 1 – 3 или нижевыше” = это можно настроить).
Примечания: на скриншотах показаны точки входа.

Параметры
MaxHistoryBars – сколько прошлых баров проверять.
Depth – минимум свечей, на котором индикатор не построит второй максимум/минимум, если условия первого параметра годятся для того, чтобы построение состоялось.
Deviation – минимальные значения количества пунктов между максимами и минимумами двух соседних свечей, чтобы индикатором была сформирована вершина или локальная впадина.
Backstep – минимальное количество свечей между локальными минимумами или максимумами. Изменение параметра влияет на то, насколько индикатор чувствителен. Если мы уменьшим данные для расчета системы, то количество экстремумов вырастет.
On what number bars move line, (0 = zero bar) – на какое количество свечей сдвинуть линии (если 0 = нулевой бар).
width (Wolfe Waves), (0 = automatic settings) – ширина (волны Вульфа) (если = 0, автоматическая настройка).
show Wolfe Waves: if signal falls under selected (%) – рисовать волны Вульфа: если сигнал попадает под выбранные (%).
Select signal – определять появления волн. Чем выше проценты, тем строже условия для определения волны.
if (Wolfe Waves) not finds wait N bars, then continue search – если волны Вульфа не найдены, ждать N свечей, потом продолжить поиск.
timeout N bars – таймаут в N свечей.
SETTINGS FOR BREAKDOWN (WOLFE WAVES) – настройки для пробоя (волны Вульфа).
number bars closed for line. (1 – 3) or more, for adjustment (Wolfe Waves) – количество свечей, закрытых за линией 1-3 или 2-4 для перестройки волн Вульфа.
(true = closed bars on direction trend) , (false = just closed bars for line) – true = закрытие свечей по направлению тренда, false = просто закрытие свечей за линией.
Select closing – выбор закрытия.
number bars (0 = Off.) – количество свечей (0 = отключено).
number bars closed for line. (1 – 4), for adjustment (Wolfe Waves) – количество свечей, закрытых за линией (1-4) для перестройки волн Вульфа.
(true = closed bars on direction trend), (false = just closed bars for line) – true = закрытие свечей по направлению тренда, false = просто закрытие свечей за линией.
Select closing – выбор закрытия.
number bars (0 = Off.) – количество закрытых свечей (0 = отключено).
OPTIONS FOR SHOWING OFF (WOLFE WAVES) – параметры отрисовки волн Вульфа.
show Wolfe Waves: if line 1-3 or more, was broken, and closed less N bars – показывать волну Вульфа: если линию 1-3 или 2-4 была пробита и закрылись менее N свечей.
(true = closed bars on direction trend), (false = just closed bars for line) – true = закрытие свечей по направлению тренда, false = просто закрытие свечей за линией.
Select closing – выбор закрытия.
number bars closed for line, for depiction (0 = Off) – количество свечей, закрытых за линией для отрисовки волн Вульфа (0 = отключено).
setting notice when the emergence of Wolfe wave – настройка уведомления при появлении волн Вульфа.
alert – включить/отключить алерт (сообщения на экран).
sound signal – включить звуковой сигнал.
name sound signal – имя звукового сигнала.
email – включить/отключить отправку по электронной почте.
Желаем удачи!

Wavelet Trend Extractor MT5

February 2, 2020 by Guru

Introduction to Wavelet Trend Extractor
This indicator uses Wavelet Technology to extract trend from Forex price series. The wavelet technology we uses for our indicator is identical to the wavelet function implemented in MatLab Wavelet Toolbox (http://www.mathworks.co.uk/products/wavelet/features.html#key-features). Our Wavelet decomposed signals matches as close as up to 6 decimal places of those decomposed signals from MatLab Wavelet Toolbox.

This wavelet technology is commonly used in Earth Quake engineering, Signal Processing, Time series analysis, etc. The steps involving our indicators include decomposing signals into many levels of wave signals and reconstruction of trend from the filtered wave cycles. In detail, once the price series is decomposed, then the noise part of wave cycles will be removed from the price signal and then the remaining wave cycle will be used to construct the trend.

For this particular task, we use Undecimated Harr Wavelet technique. The main focus of our Wavelet Trend Extractor is to deliver accurate Scientific Data Analysis tool to our customers. Of course, our Wavelet Trend Extractor focuses on Forex Trading and building Expert Advisor. We incorporated many other useful functions in our Wavelet Trend Extractor besides the original decomposition and reconstruction algorithm. Our Wavelet Trend Extractor can be used for both manual trading and your on going Expert advisor development.

Input Variables
Trend Mode: 0, 1 or 2 only. Mode 0 uses one fully constructed trend as an entry and exit signal. Mode 1 uses two full constructed trend as an entry and exit signal. Mode 2 uses individual Wave cycle as an entry and exit signal.
Wavelet Selection Level: your choice of Wave cycle. For Mode 0 and 1, Wavelet Selection Level indicates the filtering intensity for trend construction (higher value means higher the filtering intensity). For Mode 2, it is the choice of Wave Cycle. (Smaller value means higher frequency wave and higher value means lower frequency wave.)
Smoothing Period for signal line, the signal line is a simple moving average of Wave Histogram. Recommended setting is 6.
Bars to scan: recommend to use 400 as the default setting. There is no need to change this value.

How to use Wavelet Trend Extractor for your Manual Trading
For manual trading, we recommend to attach our Wavelet Trend Extractor to H1, H4 or Daily time frame. The usage of Wavelet Trend Extractor is very similar to MACD indicator. The recommended setting for our Wavelet Trend Extractor are:

Trend Mode 2 and Wavelet Selection Level 3 with Signal Period 6 : buy if histogram > signal and sell if histogram 0 and sell if histogram 0 and sell if histogram

VWAP Universal

February 2, 2020 by Guru

VWAP is Volume Weighted Average Price. It is calculated as addition of products of volume and price divided by the total volume.

This version of the indicator is universal as it has three modes of operation:

Moving – in this mode the indicator works as a moving average. But unlike ordinary SMA it has smaller lags during big movements! Bands of square deviation can be used in the same way as Bollinger Bands.
Period – in this mode the calculations are performed from the start to the end of period with accumulation (on every bar, the value is calculated for the whole period from the start, thus it considers all the values from the start of the period). The bands of square deviation produce high quality support and resistance levels.
Timer – in this mode the calculations are similar to “Period” mode. The difference is the start and the end of the period can be set manually. The maximum period in this mode cannot exceed 24 hours.

Settings:
Max Bars – number of bars calculated on the chart (0 – all available history).
Use Mode – mode selection. 3 modes are available: Moving, Period, Timer.
Applied Price – price type.
Applied Volume – volume type (tick or real if available).
Set Moving Mode – settings for “Moving” mode.
Moving Period – period of calculation for “Moving” mode.
Set Period Mode – settings for “Period” mode.
Available Period – values of the standard periods: Hour, Day, Week, Asia, Europe, NYSE, CME or Custom.
Custom Period – custom period (in minutes).
Set Timer Mode – settings for “Timer” mode.
Start Timer – start of period for timer.
Stop Timer – end of period for timer.
Set Deviation – settings of displaying of deviations.
Show Deviation 1 – display the first square deviation.
Show Deviation 2 – display the second square deviation.
Show Deviation 3 – display the third square deviation.
This indicator can work with real volumes only if they are provided by your broker. On default, the tick volume is selected in the settings.

Секрет успеха:  Энциклопедия успешных инвестиций
Брокеры БО, дающие бонусы за открытие счета:
  • БИНАРИУМ
    БИНАРИУМ

    № 1 в рейтинге! Гарантия честности, высокий доход! Хороший выбор для начинающих. Бонус за регистрацию счета!

  • ФИНМАКС
    ФИНМАКС

    Разнообразные торговые инструменты для опытных трейдеров!

Добавить комментарий